nCode International

Welcome Guest

Search | Active Topics | Members | Log In | Register

nCode Software » nCode » Signal Processing » How to split signal on Glyphworks?

How to split signal on Glyphworks?

Options

Previous Topic · Next Topic

tgoncalves

Posted: Tuesday, August 05, 2008 3:30:58 AM

Rank: New User
Groups: Member

Joined: 8/5/2008
Posts: 1
Points: 3
Location: south africa

I'm working on Glyphworks and I have a little problem that I can not sort out.

I would like to split a MultiColumnInput signal in order to produce new channels.
Actually, my MultiColumnInput signal lasts 900s and I'd like to split it in 30 times 30s new channels.

Someone can help me with that problem? Thanx a lot.

Support

Posted: Tuesday, August 05, 2008 5:40:29 AM

Rank: Moderator
Groups: Member

Joined: 6/9/2008
Posts: 12
Points: 36
Location: Sheffield

It is possible to filter Multicolumn data in GW 5.0 using the MultiColumnFilter Glyph to achieve this, however from your explanation it sounds like you have Time Series data in a Multicolumn format, in this case I would recommend first converting the file to Time Series using the ASCII translate module and then you can easily extract the required 30 channels using the Extraction Glyph, to make this neater/quicker use a looping super glyph to set the extraction to and from limits. If you need any further information then please email me at support@ncode.com

Users browsing this topic

Guest

nCode Software » nCode » Signal Processing » How to split signal on Glyphworks?

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Main Forum RSS :

SoClean Theme Created by Jaben Cargman (Tiny Gecko)
Powered by Yet Another Forum.net version 1.9.1.2 (NET v2.0) - 9/27/2007
Copyright © 2003-2006 Yet Another Forum.net. All rights reserved.
This page was generated in 0.080 seconds.